summary:
"How to use JDL201, LK227, LK226" consists of five sections, please refer to your needs:
1. How to activate JDL201, LK227, LK226;
2. How to hold the camera for shooting and recording;
3. How to view the shooting content;
4. How to set up the camera;
5. How to test if the camera's motion detection function works;

1. How to activate JDL201, LK227, LK226
Step 1, Install the battery, and then, turn the button from "OFF" to "ON".
Step 2, Wait for the numbers in the screen to go to zero and the blue screen to appear, and then the screen will appear black, at this time JDL201, LK227, LK226 is already in operation.
Step 3, Close the cover and place the camera where you want to shoot.

2. How to hold the camera for shooting
Step 1, Slide the button to "SETUP".
Step 2, According to the screen display, when the VCR UI appears on the top left corner, it means it is in video mode; when the Camera UI appears, it is in photo mode, and you can switch the mode with the up button or down button.
Step 3, Click the right button to start shooting or recording, and tap again to stop shooting.

3. How to view the shooting content
Step 1, Slide the bottom button to "SETUP".
Step 2, Click "REPLAY/PLAY" button to open the album, up button to view the previous one, down button to view the next one, left button to delete the photo.
Step 3, Click "OK" or "MENU" button again to return to the first screen.

4. How to set up the camera
Step 1, Slide the bottom button to "SETUP".
Step 2, Click the "MENU" button to enter the setting interface.
Step 3, Click the button to enter the setting interface you need to modify.

5. How to test if the camera's motion detection function works
Step 1, Slide the bottom button to "SETUP".
Step 2, Click the "MENU" button to enter the setting interface.
Step 3, After about 30s, please walk to the front of the camera wave your hand. If the blue or green light flashes, it indicates that the camera's infrared motion sensor is working properly.